background image

H.E.R.O. INDUSTRIES                                  

           1150GSD  MANUAL - “B” VERSION 

H.E.R.O. WARRANTY 

 

H.E.R.O. INDUSTRIES LTD., guarantees this airless pump to be free of 
defects in materials and workmanship to the original owner, for a period of 
one full year from the date of purchase.  
The warranty entitles the owner to parts replacement at no charge. The 
parts replacement warranty is valid for any necessary replacement, whither 
caused by material or workmanship defect or simple wear. The hydrapulse 
membrane (part# 4-04-22-4500) is warranted for LIFE. Installation costs 
for the hydrapulse membrane is provided for the first 12 months only. H.E.
R.O. Industries Ltd. offers no warranty on the intake ball, outgo ball, drive 
belt, hoses, gun or accessories, plastic, rubber, other soft goods or motor 
used in or supplied with the H.E.R.O. sprayer.  
Motor, accessories, etc., which are supplied by other manufacturers and are 
attached to or supplied with the H.E.R.O. airless pump, are warranted only 
to the extent that these parts are warranted by their respective 
manufacturers. Warranty claims must be made directly to such 
manufacturers or their local authorized service depots. 
The warranty is only applicable to the original purchaser and the equipment 
has been properly used, operated and maintained in accordance with all 
instructions, precautions and warnings contained in this manual. For the 
purpose of this warranty, damage resulting from accident, abuse, improper 
cleaning or operation, fire, flood, or Act of God, is not covered.  
H.E.R.O.’s liability is limited to replacing parts found to be defective or 
worn and does not include; transportation costs, damage or other expenses 
of any kind incurred in connection with the purchase and use of this 
sprayer. 
Repairs claimed under warranty must be performed at an authorized H.E.R.
O. Service Center, using only genuine H.E.R.O. parts. Parts necessary 
under warranty claim will be supplied by your local H.E.R.O. Service 
Center.   

DO NOT 

return worn parts to factory without authorization. 

To qualify for the warranty, the warranty card (attached to this page) 
supplied with this H.E.R.O. airless pump, must be completed with 

Summary of Contents for 1150GSD






































Reviews: