29
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
INSTALLATION AND SERVICE MANUAL
INSTALLATION AND SERVICE MANUAL
INSTALLATION AND SERVICE MANUAL
INSTALLATION AND SERVICE MANUAL
INSTALLATION AND SERVICE MANUAL 917N-CMT, 927CMT, 957CMT
184617-02
Figure 9-6
9.3 MTS Slide Switch Replacement
–- continued
B. CHECKING THE MTS SLIDE SWITCH
ASSEMBLY
CAUTION
DO NOT place hands near
the MTS rollers. Severe
personal injury could result.
1. Reconnect power to the freezer.
2. With the MTS handle in the down
position put the MTS switch in the
"ON" position. If the slide switch is
working properly, the MTS will not
come on.
3. Place the MTS switch in the “OFF”
position.
4. Close the MTS handle and lock in
place with the swing hook.
5. Place the MTS switch in the "ON"
position. If the slide switch is
working properly, the MTS will
come on.
6. With the MTS running, unlock the
swing hook and slowly lower the
housing using the handle. If the
slide switch is working properly, the
MTS will shut off within 3/8” (9.5
mm) travel.
NOTE
: If the MTS slide switch will not turn
on, readjust switch to left or right and test
again. If the MTS slide switch does not
operate properly, call the factory.
7. After the slide switch has been
checked for proper operation,
disconnect power.
8. Open the slide, and remove screws
holding the MTS in place.
9. Pull off MTS to expose switch. Apply
silicone sealant around switch and
lead wires. See figure 9-6
10. Reapply a thin coat (less than 1/32"
thick or .8 mm) to the left side of the
switch, and 1/16" (1.5 mm) thick
coat to the top, bottom, and right
side of the switch. (See Figure 9-3.)
Do not reapply RTV to the surface of
the switch that faces the cab
opening. Failure to complete this
procedure could result in the slide
opening and closing improperly.
CAUTION
To avoid electrical shock
or contact with moving
parts, make sure all
switches are in the "OFF"
position, and the main
power supply is
disconnected. Some
freezers have more than
one disconnect switch.