H.C Duke & Son Electro-Freeze Genesis Series, Operator’S Manual With Illustrated Parts List, Page: 75 / 96

ELECTRO FREEZE Soft Serve Model GEN-2080
185240
65
USE ONLY ORIGINAL OR AUTHORIZED REPLACEMENT PARTS WITH THIS FREEZER.
(See your Illustrated Replacement Parts Manual)
Should you have any questions on items that are not included in this maintenance schedule, or
problems where service assistance is needed, please call your local
Electro Freeze Distributor or
H. C. Duke & Son, LLC. Electro Freeze Service Department, for factory service at (309) 755-4553
or (800) 755-4545.
Winter Storage
To protect the unit during seasonal shutdown, it is important to store the
GEN-2080 Combination Soft Serve/Shake Freezer properly. Please use
the following procedures:
1. Disconnect all power to the freezer.
2. Disassemble and wash all parts that come into contact with the mix
with a warm, mild detergent solution. Rinse in clear water and dry all parts
thoroughly.
3. Store the loose parts, such as the head assembly, beater
assembly, and pump parts in a safe, dry place.
4. Do not lay heavy objects on the plastic or rubber parts.
5. Cover the freezer and all loose parts to protect them from dust or
other elements that could contaminate them while in storage. Place the
freezer in a dry location.
6. On air-cooled freezers, have condenser fins cleaned by an
authorized service technician.
Important:
The water valve must be opened in order to blow out the condenser.
Failure to purge the freezer of water can result in severe damage
to the refrigeration system. Call your Electro Freeze Distributor for
service.
7. On water-cooled freezers, disconnect the water supply. Use
compressed air to blow out all remaining water in the condenser.
8. When freezer is restarted after seasonal shutdown, remember to
replace all O-rings and seals with new parts. Rubber parts can lose their
elasticity and ability to seal when they are stored.
16 Routine Maintenance
(continued)