H.C Duke & Son Electro-Freeze Genesis Series, Operator’S Manual With Illustrated Parts List, Page: 12 / 96

ELECTRO FREEZE Soft Serve Model GEN-2080
2
185240
2.1 Uncrating and Inspection
Figure 2-1 Machine Bolted to Shipping Base
CAUTION
Be sure to properly support
the machine when removing
bolts and installing legs or
casters.
When the unit is received and while
the carrier is still present, inspect the
shipping carton for any damage that
may have occurred in transit. If the
SHOCKWATCH
®
label indicates red and/
or the carton is broken, torn, or punctured,
note the damage on the carrier’s freight
bill and notify the carrier’s local agent
immediately.
1. Remove the carton from the
pallet, and move the machine as close as
possible to the permanent location.
2. Remove the shipping bolts on
the bottom of the freezer (figure 2-1) and
install either the legs or casters (figure
2-2).
Figure 2-2 Installing Mounting Legs or Casters
2.2 Installation
CAUTION
All materials and connections
must conform to local
requirements and be in
compliance with the National
Electrical Code (NEC).
1. This freezer is designed for indoor
use and must be protected from outdoor
weather conditions.
– continued
NOTE: Screw casters
or legs all the way in
coupling, then adjust
out to level side to side
with a 1/4” slope to the
front.