H.C Duke & Son Electro-Freeze Genesis Series, Operator’S Manual With Illustrated Parts List, Page: 71 / 96

ELECTRO FREEZE Soft Serve Model GEN-2080
185240
61
16 Routine Maintenance -
(continued)
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the “OFF” position and that
the main power supply is
disconnected. Some freezers
have more than one disconnect
switch.
1. Clean the mix transfer system:
Important:
If the transfer hose is assembled
improperly or replacement has been
neglected, it may be necessary to clean
mix from the MTS due to hose failure.
If this happens frequently the MTS should
be removed for complete cleaning.
a. Remove cover, loosen
swing clamp and open shoe to gain
access to the hose cavity.
b. Remove mix transfer
hose assembly.
c. Lay a towel on the
cabinet base below the MTS.
d. Using the spray bottle
supplied, flush the hose cavity and
roller assembly.
e. Use a brush (supplied)
to clean in between rollers. Flush
with sanitizer.
f. Wipe all surfaces with a
clean dry cloth.
g. Remove and clean
shoe. See figure 16-1.
AS NEEDED
CAUTION
Make sure the freezer
is depressurized before
proceeding.
Figure 16-1