H.C Duke & Son Electro-Freeze Genesis Series, Operator’S Manual With Illustrated Parts List, Page: 27 / 96

ELECTRO FREEZE Soft Serve Model GEN-2080
185240
17
5 Part Names and Functions
— Shake
1.) BLADE - SCRAPER: Scrapes the
frozen product from the freezing
cylinder wall.
Important:
Shake blades have 3 holes and are
not interchangeable with the 2 hole
soft serve blades. If the incorrect
blades are used the freezer could be
damaged.
2.) SHAFT - BEATER: Rotates in the
freezing cylinder, blending air and mix
and ejecting product.
3.) O-RING-SHAFT SEAL: Seals the
beater shaft to the shaft seal. Is
inserted into the shaft seal washer.
Must be lubricated.
4.) WASHER-SHAFT SEAL: Holds the
shaft seal o-ring. Lightly lubricate
the side opposite the cup seal.
5.) SEAL(CUP)-BEATER SHAFT: Seals
the opening between the freezing
cylinder and the beater shaft.
Do not
lubricate rubber cup portion .
The following descriptions apply to figure 5-2. The number preceding the
part name corresponds to the number in the figure.