GYS PROTIG 201 AC/DC, Original Instructions Manual

Page: 13 / 22

 4T MODE
t t
t t
t
t
T2
T1
Main button
T3
T1
Main button
T2 T4
T3 T1
Main button
T2
T4
Secondary button
or
>0.5s <0.5s <0.5s
T1: The main button is pressed, the cycle starts at PreGas and stops in the
I_Start phase.
T2: The main button is released, the cycle continues in UpSlope and in
welding.
T3: The main button is pressed, the cycle switches to DownSlope and stops
in I_Stop phase..
T4: The main button is released, the cycle ends with PostGas.
 4T LOG MODE
t t
t t
t
t
T2
T1
Main button
T3
T1
Main button
T2
T4
T3
T1
Main button
T2 T4
Secondary button
or
>0.5s <0.5s <0.5s
T1: The main button is pressed, the cycle starts at PreGas and stops
in the I_Start phase.
T2: The main button is released, the cycle continues in UpSlope and
in welding.
LOG : this mode is used during welding :
- A brief press of the main button (<0.5s), the current switches
from I welding current to I cold and vice versa.
- The secondary button is kept pressed, the current switches from I
welding to I cold.
- The secondary button is released, the current switches from I cold
to I welding.
T3: A long press on the main button (>0.5 sec.), the cycle switches
to DownSlope and stops in the I_Stop phase.
T4: The main button is released, the cycle ends with PostGas.
For this mode it may be convenient to use the dual button torch option or dual button with potentiometer. The "up" command keeps the same function
as the single button or trigger torch. The secondary button can, when pressed, switch to the cold current. The welding torch potentiometer, when
present, allows the welding current to be adjusted from 50 % to 100 % of the setpoint.
COMMAND TRIGGER CONNECTOR
DB torch
L torch
NC
P
torch
P
L
DB
L
torch
DB
torch
DB + P
torch
Cabling diagram for the SRL 18 torch. Electric diagram based on type of torch used.
Torch type Wire description Pin
Torch with 2 tr
potentiometer
Torch with 2 triggers
Torch with 1 trigger
Common/Earth 2 (green)
Switch trigger 1 4 (white)
Switch trigger 2 3 (brown)
Common/ Potentiometer
earth
2 (grey)
10 V 1 (yellow)
Cursor 5 (pink)
27
EN
Translation of the original instructions
PROTIG 201 AC/DC - 201L AC/DC