24/29
Step 1 :
Loosen the M5 screw
:
Step 2 :
Add contact grease
ref.050440
on the surfaces in
contact. Insert the C arm in its holder.
Step 3 :
Turn the lever at a position like on the picture (angle of
60° with the holder )
STEP 4 :
Tighten the ring manually.
Step 5:
Tighten the M5 SCREW :
Step 6:
Tighten the lever.
Pin must not be in contact with end of stroke of the lever
60°
maxi
Summary of Contents for GYSPOT INVERTER BP.CX
Page 22: ...22 29...
Page 25: ...25 29 Type of arms for C clamp 3 C1 C2 C3 C5 C6 C4...
