34
NEOPULSE 220 C / 220 C XL
EN
2
Process :
corresponds to the interface of the welding process in progress:
1
Process parameter: allows process settings,
2
At the various adjustment windows,
3
JOB: gives access to the different JOB reminder modes.
1
2
3
3
Process parameters:
corresponds to the process parameter setting window:
•
MIG-MAG
(GMAW)
:
Material/gas pair (Synergic welding parameters), wire diameter,
welding process (Manual, Dynamic STD, etc.), trigger mode.
•
TIG
(GTAW)
:
electrode diameter, + to be seen
•
MMA
(SMAW)
:
sub-process (Standard or Pulse), electrode type, anti-sticking, etc.
Energy:
configuration of the energy mode, developed for welding with energy control
supervised by a DMOS (see chapter «ENERGY MODE»).
4
:
corresponds to the program recall modes window:
• JOB: create, save, delete and recall JOB.
•QUICKLOAD: JOB recall using the trigger when not welding.
SEMI-AUTOMATIC WELDING (MODE MIG / MAG) - GMAW
THE SETTINGS OF THE MIG / MAG PROCESS
Settings
Designation
Adjustable settings
Manual
Standard
(Dynamic STD)
Pulse
Recommendations
Torque
material/gas
- Fe Ar CO2 18%
- Al Mg 5 Ar 100%
- HARDFACE Metal
- etc
Choice of the material to be welded.
Synergic welding parameters
Wire diameter
Ø 0.6 > Ø 1.2 mm
Choice of wire diameter
Welding process
- Manual
- Dynamic STD
- Pulse
- Cold Pulse
Arc Module
OFF - ON
Enables or not the modulation of the welding
current (appearance of a TIG weld bead)
Trigger behaviour
2T, 4T
Choice of trigger welding management mode.
Tack welding mode
Spot, Delay
Choice of scoring mode
Settings
Thickness
Speed
Current
Choice of the main parameter to be displayed
(Thickness of the part to be welded, wire speed,
average welding current).
