Translation of the original instructions
GYSPACK PRO 700 / 900
10
EN
• For more information on the progress of the state of charge:
CHARGE
6 A
7
STEP
SMART
CHARGER
1
2
3 4
5
6
7
U
I
CHARGE
6 A
7
STEP
SMART
CHARGER
1
2
3 4
5
6
7
U
I
off
flashes
lit
CHARGE
6 A
7
STEP
SMART
CHARGER
1
2
3 4
5
6
7
U
I
Red light on
If the unit remains charged for more than 24 hours, stop
charging.
The internal battery of your GYSPACK is damaged.
CIGAR LIGHTER SOCKET
It can be used for the following uses :
To connect a portable lamp (fusible 15.A)
• To maintain and save the memories of the vehicle. Warning : check before that the consumption does not exceed
the fuse gauge (risk of cables heating).
It is forbidden to reload the booster using the cigar lighter socket. It must be used only for very low consumptions.
PROTECTIONS
Your product has been developed with a maximum of protections.
• The grips of starting are insulated.
• This device is protected by one fuse 200 A (700 : ref. 054547) or 300 A (900 : ref. 054561).
• Thermal protection: the battery transformer of the product is protected by a thermal switch (cooling: about ¼ h).
USE OF CIGARETTE LIGHTER PLUGS
This type of cigarette lighter connection lead is limited to 10A. Supplied with some
of our GYSPACK, they are SOLELY designed for memory backup. Any other use
can be dangerous.
Risk of fire! We strongly advise against using the cigarette
lighter lead to jump start or power a 12V appliance for instance.
BATTERY NOT COVERED BY WARRANTY
Batteries are live parts, their life depends on maintenance. After each use of this starter, it is essential to recharge the
internal batteries. Storage in places with high temperatures greatly reduces the battery charge. In the case of prolonged
non-use, it is strongly recommended to recharge the batteries before use. In general, we recommend leaving the
product plugged in continuously to maintain the batteries at their best performance.
This product is equipped with a high performance batterie if the maintenance instructions are not followed the batteries
can deteriorate irreversibly over time.
For this reason the GYSPACK batteries are excluded from the warranty.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
