GWT PR 1713/00, Operating Manual, Page: 35 / 56

PR1713 Operating manual
Batching
Page 33
A number of specific parameters which shall be read out and changed as simply and quickly as pos-
sible is stored under the recipe name. The parameter set changes dependent of the batch mode.
Recipe name +...
Batchmode
B1 - B6
G1 - G6
D1, D2 A1
D3 A2
B8
D4 - D8
Rl, RQ, RL
! ! 01 ! ! line number
Component
Line setpoint
Total mode
Calulation mode
With the licence for multiple recipes (PR1713/21), recipes
could be selected or created. If not, this menue is skipped.
The recipe name selected last is displayed as proposal (e.g.
Tart3). It can be changed by selecting the available recipe
names. Limitation by list preselection is possible. A new re-
cipe can be inserted in position '* new *'. 'Enter' completes
the selection.
When trying to assign a recipe a name which was already as-
signed to another recipe, an error message is displayed.
•
Press key 'quit' to leave the entry of a new recipe.
The selected name is displayed in the upper line. In the lower
line, all parameters can be selected. The relevant line number
is always displayed on the left. It can be edited first. The va-
lue of another parameter is displayed right beside the line number. The component name is displayed
first. The line number can be selected by 'scrolling' or by editing a value entry directly.
Note: There are no empty lines in the recipe.
With the first softkey, a selection for inserting or deleting a
recipe line is displayed.
The second softkey is used for inserting a copy of the
actual line. The line numbers of the subsequent lines will increase by one.
The third softkey deletes the current line. The line numbers of the following lines decrease by
one.
When selecting a line number behind the last one used in this
recipe, a prompt whether another line shall be appended is
displayed. The number of lines must not exceed the configu-
rated maximum number. The absolute maximum is 255 lines.
Select Recipe
! !
* new *
! !
Select Recipe
!
!
Tart3
!
!
Name already exist
OK
Tart18
!
!
1
!
!
Sugar1
Tart18
1
Insert Delete
Append new line
Yes
No