GWT PR 1713/00, Operating Manual, Page: 19 / 56

PR1713 Operating manual
Counting scale
Page 17
5 C
OUNTING SCALE
A counting scale permits conversion of a weight from the weighing point into a number via a factor.
These factors can be defined by the user and are stored in a separate table in the database.
Count Screws4
! !
1
! !
264 pcs
is displayed by selecting softkey 'Count' from the main menu.
By scrolling
!, the fixed tare value can be selected, or the factor number is selected directly by the
numeric keys. Apart from its number, each entry has a plain text name. The count is updated conti-
nuously. The count factor is selected with 'Enter' .
The properties of the selected factor can be changed, dis-
played or printed out.
By pressing softkey 'set' , a new factor is calibrated.
1) Discharge the hopper: empty bin or plattform and set to zero or tare,
2) Calibrate with a selected number of objects and enter this value. Thereby, the accuracy is the
higher the higher the calibration weight, similar to every calibration.
The display returns to the selection menu.
Softkey 'show' displays the calibration values. The display returns to the selection menu.
Softkey 'print' prints out one or all count factors. The dis-
play returns to the selection menu.
•
An entry can be completed with 'enter'. The changes are stored.
•
Pressing 'quit' leaves the entry. When editing a value, the old value is restored. With an unchanged
value, the old value is restored. With an unchanged value, a jump back to the fixed tare selection is
made.
Count Screws4
Set
Show Print
Print
Single
All