GWT PR 1713/00, Operating Manual, Page: 24 / 56

Batching
PR1713 Operating manual
Seite 22
The selected name is displayed in the uppermost line. In the
bottom line, all parameters can be selected. The first parame-
ter is displayed. The relevant value is displayed beside the
parameter, i.e. a quick survey of all settings of a component is
possible by parameter scrolling.
For editing parameter 'Preset', selection with 'enter' is requi-
red. The value of this parameter is edited by entry of a num-
ber. See cursor in the numeric value. The unit is changed by
the 'more'-key.
Alle standard batch modes could be selected by scrolling.
Additional new mode names could be selected by entering
alphanumerical keys.
The setpoint of the 'calming time' is a time, which has to be
entered with the units 'ms', 's', 'm' or 'h'. Eg. 1m30s are one
minute and thirty seconds.
•
An entry can be completed with 'enter'. The changes are not stored.
•
The entry is left with 'quit'. When editing a value, the old value is restored. With an unchanged
value, a jump back to parameter selection is made. When leaving the parameter entries, a prompt if
these data shall be stored is displayed. Subsequently, the operation is continued at the next higher
level with component name selection.
Sugar
! !
WP
! !
A
Sugar
!
!
BMode
!
!
B1
Sugar
! !
SPM in
! !
1
Sugar
! !
SPM out
! !
1
Sugar
! !
Preset
! !
2 kg
Sugar
! !
OVRshoot
! !
5 kg
Sugar
! !
Tol.+
! !
1 kg
Sugar
! !
Tol.-
! !
1 kg
Sugar
!
!
MinFlow
!
!
25 kg
Sugar
! !
Calmtime
! !
1s
Sugar
! !
RST Mode
! !
0
Store ?
yes
no
Sugar
Preset: _15
kg