OPERATION
79
Exit
Press the Test key again to exit the
Test settings. The Test key light
will turn off.
Test
Load Test Script from USB
Overview
Before a test script can be run, it must first be
loaded into a one of the 10 memory save slots.
Before loading a test script into memory:
Ensure the script file is placed in the root
directory.
Ensure the file name number corresponds to
the memory number that you wish to save
to.
For example: A test file named t001.tst can
only be saved to memory number 01, t002.tst
can only be saved to memory number 02,
and so on.
Steps
1.
Insert a USB flash drive into the
front panel USB-A slot. Ensure the
flash drive contains a test script in
the root directory.
2.
Turn on the power. MS (Mass Storage) will be
displayed on the screen after a few seconds if
the USB drive is recognized.
