COMMUNICATION INTERFACE
129
^j can be used as the terminal character
when entering the queries/commands from
a terminal application.
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
Web Server Remote Control Function Check
Functionality
check
Enter the IP address of the power supply in a
web browser after the instrument has been
configured as a web server (page 126).
http:
//
XXX.XXX.XXX.XXX
The web browser interface appears.
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
Socket Server Function Check
Background
To test the socket server functionality, National
Instruments Measurement and Automation
Explorer can be used. This program is available
on the NI website,
www.ni.com
., via a search
for the VISA Run-time Engine page, or
“downloads” at the following URL,
http://www.ni.com/visa/
Requirements
Firmware: V1.12
Operating System: Windows XP, 7
Functionality
1.
Start the NI Measurement and Automation