APS-7000 Programming Manual
100
Query Syntax
[:SOURce]:READ?
Return parameter <voltage>,<current>,
<frequency>,<power>,
<SVA>,<ipeak>
Returns each measurement
readout as <NR3>.
Example
:READ?
>
+111.9700,+0.0000,+59.9990,+0.0000,+0.0000,
+0.0000
[:SOURce]:SEQuence:CPARameter
Set
Description
Sets the common parameters for the Sequence
mode. Please see the user manual for a full
description of each parameter.
Syntax
[:SOURce]:SEQuence:CPARameter
{<NR2>,<NR2>,<bool>|OFF|ON,<NR2>,<bool>|OFF|
ON,<NR1>|CONTinue|END|HOLD,<NR1>,<bool>|OF
F|ON,<NR1>,<NR1>,<NR1>,<bool>|OFF|ON,<NR1>,
<bool>|OFF|ON,<bool>|OFF|ON}
Query Syntax
[:SOURce]:SEQuence:CPARameter?
Parameter
<NR2>
Step Time
<NR2>
On phase
<bool>|OFF|ON
On phase on(1)/off(0)
<NR2>
Off phase
<bool>|OFF|ON
Off phase on/off
<NR1>|CONTinue|
END|HOLD
Term settings:
Continue(1)/End(2)/Hold(3)
<NR1>
Jump step number (0 ~ 255)
<bool>|OFF|ON
Jump on(1)/off(0)
<NR1>
Jump Cnt (0~ 255)
<NR1>
Code (External trigger output):
HI=1/LO=0
<NR1>
Branch1 (0 ~ 255)
<bool>|OFF|ON
Branch1 on(1)/off(0)
<NR1>
Branch2 (0 ~ 255)
<bool>|OFF|ON
Branch2 on(1)/off(0)
<bool>|OFF|ON
Trig Out. HI=1/LO=0
All manuals and user guides at all-guides.com