In the PVR File System sub-menu you will be asked to format your USB 2.0 flash drive or Hard Disc
for PVR Operation. If you are not familiar with the various drive or partition options for storage
devices, start this process using a blank (ie. unused storage device), or one which does not hold
sensitive or required data.
PVR File System
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
Select Disk C:
Select Disc
To view and select the USB drive or Hard Disc that you would like to record to, press the OK button
to enter the Select Disk sub-menu and then press or buttons on your remote control to select
the particular storage device type that is connected to the TV. Press the OK button to return to the
PVR File System sub-menu.
20
Advanced Features
Note:
1) The OSD Language option allows you to select the language used in the various TV menus from
a wide selection.
At the initial setup stage of the TV, the default language is English, and it is recommended that this
setting is not changed unless you are fluent in any new language chosen.
2) The Audio Languages and Subtitle Languages options relate to DTV reception only. Some TV
channels transmit their audio and subtitles in more than one language, and if this is known in
advance, you can select this alternative language. At the initial setup stage, the default language is
English, and it is recommended that this setting is not changed unless you are fluent in any new
language chosen.
3) HDMI CEC (Consumer Electronics Control) allows your TV to share control of some functions
with various compatible equipment via an HDMI cable connection. The HDMI cable connecting
your equipment to this TV must support both ARC and CEC functionality.
For example, with HDMI CEC set to "On" in the TV's menu and also on an HDMI connected device
that supports CEC (eg. a Blu-ray player), selecting the HDMI input on this TV sends a signal to the
Blu-ray player and may switch it On from its Standby state (depending on the player's CEC
capabilities). If the HDMI CEC and Auto Standby in the HDMI CEC menu are both set to "On" in the
TV's Option menu, and the connected equipment supports the Standby function, then switching On
the HDMI connected player may also switch On the TV from its Standby state. This activity may
even set the TV to the HDMI input that the external device is connected to (again, these examples
depend on the capabilities of your connected equipment).
The HDMI CEC system supports a wide variety of commands, many of which may not be applicable
to this TV or any connected HDMI equipment. Refer to the User Manual of your other equipment to
check what areas of the CEC commands they may be able to work with. If after selecting CEC
operation you find the TV or any connected equipment performing unusually (eg. switching itself
back on after you're switched it back to the Standby mode), your connected equipment may not be
compatible with this TV, and the HDMI CEC sub-menu should be set to the off position.
