1. Picture mode:
Press OK Key enter Pcitrue mode Select Menu.Press
adjust Picture mode.Under User mode,
press can adjust constrast,brightness,color,sharpness.etc.
The Tint option is available in NTSC system countries only.
2. Color temperature:
Press OK Key enter color temperature Select Menu. press
adjust olor temperature. Under
User mode press
can adjust Red ,Green,Blue.
3. Aspect ratio:
Press OK Key enter Aspect Ratio Select Menu. And press
adjust Aspect Ratio.
The Aspect Ratio option allows you to select either Auto, or manually select 4:3, 16:9, Zoom1,
Zoom2 or Just Scan screen ratios. For general use leave this setting in the Auto position.
4. Noise reduction:
Press OK Key enter Noise Reduction Select Menu. And press
adjust Noise Reduction. The
Noise Reduction option is for use in areas using ATV (analogue) transmissions.
5. Screen:
Press OK Key enter Screen Menu. And press
adjust H.POS,V.POS,etc. The Screen option
is only available once the Input Source is set to PC and a compatible signal is present on the
VGA input socket. Once selected, you can adjust the horizontal and vertical screen position,
size and phase or select an Auto Adjust mode.
< >
Balance
Auto Volume
Sound Mode Standard
SOUND
Surround Sound
SPDIF Mode
3.Sound menu
The third item of the menu is the Sound menu.
You can adjust sound effects here such as treble, bass, balance etc. Press to move, press OK
to adjust.
1.Sound mode:
Press OK Key enter Sound mode Select Menu.press adjust Sound mode. There are five Sound
modes that can be selected: Standard, Music, Movie, Sports, and User. The User option allows you to
adjust Bass and Treble sound effects from the TV speakers to suit your listening preferences. NB.
These sound modes are not active on the audio outputs.under User mode press can adjust
Treble,Bass.
2.Balance:
Press OK Key enter Balance adjust menu. press adjust Balance.adjust range is 0-100.
3.Auto volume:
Press OK key to switch on or off. The Auto Volume option helps reduce excessive input
signal variations that may lead to distorted sound. For most standard installations, this sub-menu
should be set to the Off position.
4.Surround sound:
Press OK key to switch On or Off. The Surround Sound option generates an artificial widening of the
sound stage from the TV. If this sound effect is not suitable in your installation, leave this sub-menu in
the Off position.
18
Advanced Features
