First time powering on the TV :
When you first power up your TV, (or you reset the TV to its factory settings), it will
automatically enter the TV Auto Tuning mode. This is where the TV searches for
available TV stations and stores the station details it finds. Make sure your TV antenna
is connected before proceeding with this operation.
By default, an On Screen Display will offer a language selection (pre-set to English), so
just press the OK button on the Remote Control to confirm this option. The OK button is
located in the middle of the cursor arrow button area of the Remote Control.
Firstly, on the upper-middle section of the Remote Control are the main cursor selector
arrows with the OK button in the middle of them. Directly above and to the left of the cursor
arrows is the Main Menu selector button, which displays the Main Menus on the TV's screen.
In the following section of the User Manual, when the operation of the options in the Main
Menus are being described, you first need to press the Main Menu button to activate the
Menu function, then press the Left or Right cursor arrow buttons to select the relevant Menu,
and the Up or Down cursor arrow buttons to move within the options inside each Menu. If at
any time you mis-select a Menu or setting, press the Exit button (located on the bottom right-
hand side of the cursor arrow buttons) to exit the Menu setting.
Channel Tuning
65% UHF CH 33 DTV
TV : 9 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
Data : 0 Programme(s)
The TV will then offer a selection of countries, with Australia as the pre-set option.
Again press the OK button to confirm this selection. Your TV will now scan through all
the analogue TV (ATV) and digital TV (DTV) stations that it can receive using the
connected antenna. This process may take several minutes, but once completed, the
TV will skip to the first DTV program.
The “radio” channels found during the TV Auto Tuning function are the sound-only
services provided by some TV stations.
Using the Main Menus :
Once the TV has run through the Auto Tune mode and found the available programs,
you will then need to know how to select the relevant input you want (eg. DTV, AV,
HDMI etc), and also how to select and adjust the various Menus that allow you to tailor
the operation of the TV to suit your application.
The following pages marked “Menu Settings” will cover the usage and settings of the
various menus in more detail. Please read them carefully to gain the most benefit from
your TV.
Dansk
Deutsch
Hrvatski
Italiano
Please select an OSD Language
OK
Magyar
Nederlands
Norsk
Polski
English
Cesky
E ka
Espanol
~
Fran ais
Portugues
Pycck
Austria
Belgium
Country
OK
Australia
Croatia
Finland
Greece
Luxembourg
Czech
France
Hungary
Bulgaria
Denmark
Germany
Italy
14
Advanced Features
Ireland
