5
4. Child lock function
Use this feature to lock the control panel when you
are cleaning or so that children can not use the oven
unsupervised. A beep sound will be heard. All the
buttons are de-activated in this mode
5. Auto reminder
When your preset cooking procedure have finished,
the LED Display will show and six beeps
sound will be heard to prompt you to take out food. If
you do not press
Stop.Clear
button once or open the
door, the beep will sound at an interval of 3 minutes.
6. Stop.Clear
Press
Stop.Clear
button once to
1.Stop the oven temporarily during cooking .
2.Clear the enter if you make a mistake during programming .
Press
Stop.Clear
button twice to cancel the program during cooking.
7. Microwave cooking
Press
Micro Power
button, LED will cycle to show
--- High power, the magnetron is energized
all the operation time.
---
Medium High power, 80% microwave
power .
--- Medium power, 60% microwave
power .
--- Medium Low Power, 40% microwave
power .
--- Low power, 20% microwave power .
NOTE:
1.The max time you can set is 99 minutes
and 99seconds..
2. Never operate the oven empty.
3.If you want to turn the food during operation, open the oven door to perform after operation close the door,
press the
Instant.Start
button once and the preset cooking procedure will continue.
4.If you intend to remove the food before the preset time, you must press
Stop.Clear
button twice
to clear the preset procedure to avoid unintended operation of next time use.
Press Display
1.Select the desire microwave power by
pressing
Micro Power
button consecutively.
2.After selecting power ,set cooking time
by turning
Auto Cooking/Weight.Time.Temp
knob
.
For example you want to cook the food
for 10 minutes and thirty seconds .
3.Press
Instant.Start
button to start cooking.
4.You can change the cooking time by turning
Auto Cooking/Weight.Time.Temp
knob
during cooking.
To set child lock
Press Display
Press and hold
Stop.Clear
button
about 3 seconds or until the LED
appears as follows.
To cancel child lock
Press Display
To unlock, Press and hold
Stop.Clear
button for about 3
seconds or until LED appear colon .
:
