“GF” SERIES AUTOMATIC WATER CONDITIONERS
INSTALLATION
6
D. Manual Regeneration
The user can initiate manual regeneration.
Pressing and holding the REGEN button for approximately 3 seconds will immediately start the regeneration. The
user cannot cancel this request.
NOTE:
Program Timer “Lockout” Feature
The Program Timer is initially set to allow access to all Programming, Diagnostic and History screens. The Installer
can limit access to (lockout) most screens by activating the Lockout Feature.
Activating “Lockout” allows the user to view and change only Water Hardness, Days Override, Time of Regenera-
tion and Time of day.
Activate “Lockout” Feature:
Press DOWN then NEXT then UP then CLOCK in sequence. LOCK will briefly ap-
pear in the display.
De-activate “Lockout” Feature:
Press DOWN then NEXT then UP then CLOCK. UNLOCK will briefly appear in
the display.
When in operation normal user displays are time of day, gallons remaining, days remaining before regeneration,
or current flow rate are shown. The user has the option to choose which screen is displayed by pressing the NEXT
button. When stepping through a procedure if no buttons are pressed within five minutes the display returns to a
normal user display. Any changes made prior to the five minute time out are incorporated. The one exception is
current flow rate display under the diagnostic procedure. The current flow rate display has a 30 minute time out
feature.
Summary of Contents for GF24
Page 27: ...GF SERIESAUTOMATIC WATER CONDITIONERS NOTES...
Page 28: ...8 569 G F R2...
