GUTHRIE & FREY GF24, Installation, Operation And Maintenance Manual

Page: 4 / 28

“GF” SERIES AUTOMATIC WATER CONDITIONERS
SYSTEM INFORMATION
1
Specifications
NOTE: This water softener is not intended to be used for treating water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after treatment.
MODEL NUMBER UNITS GF24 GF40 GF50
EXCHANGE CAPACITY
(KILOGRAINS)
MAX
MID
MIN
24,030
21,020
17,120
41,650
36,175
29,560
51,260
44,500
36,350
SALT PER REGENERATION
(LBS. / REGEN)
MAX
MID
MIN
11.5
7.5
4.5
19.5
13.0
8.0
24.0
16.0
9.5
MAX SERVICE FLOW (1) GPM 13.2 14.7 19.1
PIPE SIZE - IN/OUT
INCHES
1 1 1
DRAIN SIZE INCHES 3/4 3/4 3/4
OPERATING PRESSURE MAX PSI 125 125 125
OPERATING TEMPERATURE
MAX
DEG F 110 110 110
MINERAL TANK SIZE
(DIA. X HT.) (2)
INCHES 8X44 10x47 12x52
BRINE TANK SIZE
(DIA. X HT.) (3)
INCHES 18x40 18x40 18x40
SALT STORAGE LBS. 450 450 450
RESIN VOLUME CU. FT. 0.75 1.3 1.6
ELECTRICAL (VOLTAGE,
CYCLE)
120 Volts 60 Hz
SHIPPING WEIGHT LBS. 72 106 137
FLOOR SPACE INCHES 27x18 28x18 31x18
OVERALL HEIGHT INCHES 52 55 60
MAX FLOW TO DRAIN
DURING REGENERATION (4)
GPM 1.7 2.2 3.2
(1) Pressure drop at 15 psi.
(2) Pressure vessels are seamless and made of reinforced fiberglass, pressure-tested at 300 psi.
(3) Brine tanks are fabricated of seamless, rigid, tough, high-impact, non-toxic polyethylene.
(4) 50 psi inlet pressure.