Guntermann & Drunck DL-DVI-Vision-Fiber series, Installation And Operating Manual

Page: 77 / 132

Installation
G&D DL-DVI-Vision-Fiber · 8
English
Connecting audio and RS232 interfaces
Micro In: If required, connect a microphone to this interface.
Speaker:
Connect the speakers or another audio output device.
RS232: Connect the serial end device to this interface.
Connecting further interfaces of ARU/ARU2 variants
USB 2.0 Devices: Use the two interface on the back and the two interfaces on the front
to connect USB devices.
NOTE: The
USB 2.0 Devices
interfaces of
ARU
and
ARU2
variants support different
data rates:
 ARU
variants:
full speed
 ARU2
variants:
high speed
IMPORTANT: Transmitting data of USB devices connected to the user module
between the user module and the computer module (and vice versa) requires trans-
mission modules that use laser technology and comply with laser class 1.
Please note the following safety instructions regarding this matter:
 Only use G&D certified transmission modules on page 3
USB 2.0 Devices
USB 2.0 Trans. Serial
Micro In Speaker
Main P
ower
DVI-D DL Out Transmission Red. Power
Mouse
Keyb.
Generic
Keyb./Mouse
Serial
Micro In Speaker
USB 2.0 Trans.
USB 2.0 Devices
Main P
ower
DVI-D DL Out Transmission
Red. Power
Mouse
Keyb.
Generic
Keyb./Mouse