Guntermann & Drunck DL-DVI-Vision-Fiber series, Installation And Operating Manual

Page: 76 / 132

Installation
7 · G&D DL-DVI-Vision-Fiber
Activate the generic HID mode (see Selecting the USB-HID mode on page 37) if you want
to connect another USB input device. In this mode, any data of the USB input device
is not altered when transmitted to the computer module.
Mouse: Connect the PS/2 mouse of the console.
Keyb.:
Connect the PS/2 keyboard of the console.
Connecting the console monitor
DVI-D DL Out: Connect the console monitor.
Establishing a connection to the computer module
Transmission|Tx: Insert the LC plug of the fibre optic cable connected to the Transmis-
sion|Rx interface of the computer module.
Transmission|Rx:
Insert the LC plug of the fibre optic cable connected to the
Transmis-
sion|Tx
interface of the computer module.
IMPORTANT: If the
generic HID
mode is active, the OSD cannot be operated by a
keyboard connected to the
Generic
socket.
IMPORTANT: The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the
Transmission
interfaces and the cable
plugs.
DVI-D DL Out
Main P
ower
Serial
Transmission
USB 2.0 Trans.
Red. Power
Mouse
Keyb.
USB 2.0 Devices
Micro In Speaker
Generic
Keyb./Mouse
Transmission
Main P
ower
Serial
DVI-D DL Out
USB 2.0 Trans.
Red. Power
Mouse
Keyb.
USB 2.0 Devices
Micro In Speaker
Generic
Keyb./Mouse