Installation
5
· G&D DL-DVI-Vision-CAT
Installing the computer module
Install a compatible computer module of the digital
Vision
series as described in the
manual of the computer module.
Installing the user module
The remote console is connected to the
DL-DVI-Vision-CAT-CON
user module. The
computer connected to the computer module can be operated from this console.
Establishing a connection to a local network
Network:
Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse of consoles
Keyb./Mouse:
Connect the mouse and/or the keyboard of the console to this interface.
Generic:
In the default settings, you can use this interface to connect another USB
input device or a supported display or tablet.
NOTE:
If desired, connect the network interface to a local network. This enables
you to access the
Config Panel
web application from this network and to send sys-
log messages to this network.
NOTE:
Both the keyboard and the mouse of the console can either be PS/2 or USB
devices.
Service
USB Devices
Ident.
Main
Red.
Power
Video
K/M
Console
Trans.
System
Status
Network
Main P
ower
Serial
DVI-D DL Out
Red. Power
USB 2.0 Devices
Micro In Speaker
Transmission
USB 2.0 Trans.
Mouse
Keyb.
Generic
Keyb./Mouse
