13
-
The child car seat GOBOOSTER is not provided with a cover, therefore touch
with bare hand before seating a child on the child car seat whether the child car
seat surface is not too hot. Having felt burning, remove the child car seat from
the car and let it airing till it cools down to the acceptable temperature and then
give back into the car;
-
Provided the child car seat has been exposed to high temperature (the car in summer
in the sun), the pressure inside of the child car seat increases due to temperature and
the safety-relief valve releases the excessive air; before use in such case it is necessary
to leave the child car seat cool down to the acceptable temperature (and also
considering the safety of the transported child) and inflate it to the correct pressure;
-
At low temperatures check by touch the pressure in the chid car seat. If the child
car seat is softer than usually, inflate the child car seat.
-
When handling the child car seat avoid the contact with sharp objects and negative
effect by forbidden substances;
-
Provided the child is not able to keep up in the child car seat in a safe position, do not
use the GOBOOSTER child car seat and choose another child restraint system for
transport of the child.
16
Unsuitableness of child car use
Warning
The child car seat is not suitable for playing, it must not be used neither in water as the life-
saving apparatus nor for recreation and it is not designed for the airplane transport of children.
17
Unpacking and packing the child car seat
The purchased GOBOOSTER child car seat is placed in a textile casing together with the
User’s Manual.
Unpacking of GOBOOSTER child car seat
-
Check the ambient temperature
when unpacking the GOBOOSTER child car seat.
Provided the GOBOOSTER child car seat was folded up at the temperatures below -10 °C,
it is necessary to warm it up at the temperature above 15 °C before unpacking for the
duration of approx. 30 min. You prevent the possible damage of the fabric coating and
thereby non-reversible damage;
-
Remove the child car seat from the casing;
-
Unfold the child car seat in plane;
-
Inflate it according to the Chapter No. 8.
Packing of child car seat
-
Check the ambient temperature
when packing the GOBOOSTER child car seat. Provided
the child car seat was used at the temperatures below -10 °C, it is necessary to warm it up at
the temperature above 15 °C before packing for the duration of approx. 30 min. You
prevent the possible damage of the fabric coating and thereby non-reversible damage;
-
Deflate the child car seat with the procedure stated in the Chapter No. 8;
-
Unfold it in plane;
