4
2
European standards
The legal regulations (laws) of European Union countries define uniformly the technical
requirements which the child restraint system must comply with. The child restraint system
must meet the Regulation UN ECE No. 44 and must be approved according to this directive.
Your child car seat has been approved according to the Regulation UN ECE No. 44, the group
No. II and III for children with the weight of about (15 – 36) kg from the age of three years
and the height up to 150 cm.
The approval mark (circle surrounding the E
8
) and authorization number beginning with
double digits 04 which is located below the approval mark are put on the child car seat and
must not be removed.
The child car seat may be used only in cars equipped with adult three-point seat belts
authorized on the basis of the Regulation UN ECE No. 16 or the equivalent Directive
77/541/EEC concerning the adult safety-belts as amended.
The adult safety-belts must be fastened only in points reserved therefore, in anchoring points
which satisfy the requirements of the Regulation UN ECE No. 14 or the Directive
76/115/EEC on the anchorage points of adult safety-belts as amended.
3
List of parts
The GOBOOSTER child car seat - one-side coated synthetic textile fabric, filling valve,
safety-relief valve, safety-belt holders, textile strap, metal tintacks, buckle – trident.
Attachment: User's Manual
4
Notice for users
WARNING
No child car seat can guarantee a 100% protection from injury. However, its proper use
reduces markedly the risk of injury or death to your child. Do not let others install the child
car seat who has not become acquainted with the instructions how to use the child car seat.
The installation of the child car seat has to be carried out by adults only.
Do not install the GOBOOSTER child car seat unless you have read and understood this
Manual.
It is important
to fasten the child together with the GOBOOSTER child restraint system with
adult safety belt. The strap of the safety belt must not be twisted.
Pay your attention
to location and installation of the child car seat.
The parts of child restraint equipment including plastic parts have to be installed so that they
cannot be caught up with the movable seat or a door of the vehicle during common use of a
vehicle.
The child restraint system must not move about of its own accord or get stuck in the vehicle
door.
