GULLCO , GPP-200, Technical Manual

Page: 5 / 38

3
WELDING POSITIONER
This parts list covers the operation and maintenance requirements of the following Gullco welding
positioners:
GP-200-M, GP-200-H, GPP-200-M & GPP-200-H
SPECIFICATIONS
MODEL 0.27 – 4.62962 RPM 0.75 – 12.5000 RPM
GAS
PURGE SYSTEM
†
GP-200-M

GP-200-H

GPP-200-M
 
GPP-200-H
 
OVERHUNG LOAD RATING, TABLE VERTICAL
Distance (C of G) Load
Inches mm. Lbs. Kgs.
3 76 150 68
6 152 75 34
9 229 50 22.7
12 305 37.5 17
Stand alone weight: 53 Lbs. [24 Kg.]
Rotational Torque: 108 in.lbs [124 Kg.cm]
Vertical Table loading: 450 in.lbs [518 Kg.cm] from face.
Horizontal Table Loading: 300 lbs. [136 Kg.cm]
Supply voltage: Either 42, 115 or 230 VAC, single phase, 50/60 Hz., 200 watts.
Tilt angle: Infinitely variable from 0 to 90 degrees (horizontal to vertical).
Welding ground: Sprung loaded, rotary ground on the underside of the table.
Drive motor: 24 VDC permanent magnet gear motor.
Complies with: C.S.A. & NRTL/C and C.E. regulations.
†
The gas purge system allows pre-weld gas purging by providing a path for the gas through a rotary gas
coupling and through the center of the table spindle.