9
Use and operation
3
Description of LED controls
A description of the LED display is given below.
to start and to stop
the unit.
Press
to set
the preferred pool
temperature.
The display reads OFF when the
pool heat pump is in standby mode.
Start/stop of pool heat pump
the pool heat pump.
the pool heat pump.
The display shows the incoming
water temperature when the pool
heat pump is running.
Pressing one of the arrow keys
displays the current preferred
Set the preferred temperature
Press arrow keys repeatedly to set the preferred temperature.
The initial press displays the current preferred temperature
whereupon the screen will revert to the current incoming
temperature or read OFF.
Pressing the arrow keys repeatedly
changes the preferred temperature.
Key lock: By
holding the On/
seconds, the key
lock is activated.
To inactive the key
lock, press and hold
for 10 seconds
again.
