Use and operation
Check the outgoing water temperature
To check the outgoing water temperature, press the up arrow
for 2 seconds and then release. This displays the outgoing
water temperature for 10 seconds.
The outgoing water temperature
will be displayed once the up arrow
has been pressed for 2 seconds.
Change operating mode
*
To change the operating mode, press the up and down arrow
keys simultaneously for one second and then release. The
current operating mode is shown, where h is heating mode,
C is cooling mode, and A is auto mode.
In auto mode, the pool heat pump automatically heats or
cools the pool depending on the need, which results in
higher energy consumption.
Once the up and down arrow keys
have been pressed for one second,
the current operating mode is
shown.
Pressing the arrow keys repeatedly
changes the operating mode. The
set value is saved automatically
after 5 seconds.
Pressing the arrow keys repeatedly
changes the operating mode. The
set value is saved automatically
after 5 seconds.
Activate Silent mode
To activate the pool heat pump’s Silent mode, press and hold
the down arrow key for 5 seconds. When the Silent mode
is activated, fan and compressor run at a lower speed than
The pool heat pump can automatically return from Silent
mode to normal operating mode under certain temperature
conditions. It is even possible to manually return to normal
mode by pressing the down arrow key for 5 seconds.
Once the down arrow key has
been pressed for 5 seconds, the
Silent mode is activated. This is not
indicated on the display.
* Only if h02 = 1
