4
3.6.2 Protection degree against electrical shock: Type B
3.6.3 Protection against harmful ingress of water or particular matter:
ordinary equipment (IPX0),can’t be waterproof.
3.6.4 operation mode: short time run equipment.
3.6.5 Safety in the presence of flammable anesthetic mixture with air,
oxygen or nitrous oxide: not suitable under this condition.
4. Installation and Demounting
4.1 Aim the mounting holes which on the upper of machine ,and make
the long side of optical fiber inserted to it (must screw the optical fiber
to the end, don’t inclined inserted).
4.2 When the battery needs to be charged, connect the plug of the adapter
into the AC100V~240V power supply. Then connect the output plug of
the adapter to the DC 15V input plug of the pedestal, then put the main
unit into the pedestal. Please pull out the adapter after charging.
5. Operation
5.1 Press the mode button to set the working mode, the corresponding
indicator will on when a mode set.
5.2 High:2300~2500 mw/cm2
5.3 Soft:1000~1200 mw/cm2
5.4 Check:200~400mw/cm2
5.5 Press the time button to set the solidifying time:
High :1S, 2S, 3S
Soft:5S, 10S, 15S, 20S
Check:30S, 60S, the solidifying time
5.6 When operating, aim the optical fiber at the correct position, press
the power button , a “di”sound will appear, the LED shine the blue light
and start to work under the selected mode. Screen began to display the
countdown time. When the countdown back to 0 the work finished .Then
the screen will return to setting time.
5.7 While operation, press the power switch button can stop work at any
time.
5.8 At the end of a working cycle , the next working cycle can be started