Guilin Woodpecker Medical Instrument Fi-G, Instruction Manual, Page: 8 / 31

6
Filling Instrument and Gutta Percha Injecting Needle cool down, the
replacement can start. When the Gutta Percha Injecting Needle is still
hot, to avoid scalding, please do not pre-bent or replace the Gutta Percha
Injecting Needle.
Warning:
Before being used to different patients or before each use, please
clean, disinfect and sterilize the Gutta Percha Injecting Needle. It is
recommended that users follow manufacturer's written instructions to
properly disinfect the device; the Hot Melting and Filling Instrument
cannot be autoclaved. Do not autoclave the Hot Melting and Filling
Instrument and charging base or place them in chemical disinfectants.
10) Wrench:
The wrench is used to tighten the Gutta Percha Injecting Needle and
its connection to Hot Melting and Filling Instrument. After tighten the
Gutta Percha Injecting Needle, the needle can be bent to any suitable
angle with wrench. Do not use other instruments to pre-bend the needle
other than the wrench provided by manufacturers.
11) Cleaning brush:
To remove remaining material from inside the heating or loading slot,
set the temperature to 150℃, express any remaining material and then
turn off the Hot Melting and Filling Instrument. Insert cleaning brush
through the back of the Hot Melting and Filling Instrument, and then pull
it out through the nose of the Hot Melting and Filling Instrument. Do not
put any cleaner or chemicals on the cleaning brush before inserting it into
the chamber.
1.3 Device includes
1. Hot Melting and Filling Instrument
2. Charging base
3. Power adapter with cord
4. Gutta Percha Injecting Needles
5. Thermal Protector Cap