Guilin Woodpecker Medical Instrument Fi-G, Instruction Manual, Page: 25 / 31

23
Charging
failure after
connecting to
power supply.
1. The power supply is not
correctly connected;
2. The power supply is
damaged, or the specification
doesn’t match.
3. There are impurities on the
contact thimble of charging
base.
1. Unplug and reconnect.
2. Replace the battery.
3. Wipe the thimble
with alcohol, dry it, and
reconnect.
The service
time after each
charging is
shortened.
The battery capacity
becomes smaller.
Send to the repair center.
ERROR code
appears on
display screen.
The heating chamber is
damaged.
1. Send to the repair
center.
2. Contact local distributor
or manufacturer.
If the problem still cannot be solved, please contact your local dealer
or our company.
1. When the pushing ram is in the Hot Melting and Filling Instrument,
please do not push or pull the pushing ram vigorously. When the gutta-
percha is heated up to the preset temperature, the pushing ram should be
pushed by pulling the trigger for multiple times. If the pushing ram does
not move, try to push it manually with a slight force, and try to pull the
trigger.
2. Please refer to the recommended temperature to set the preset
temperature.
3. To remove all remaining material, please first remove the needle,
and then pull the trigger to squeeze out all the residual material in the
heating chambers. Be careful not to touch the head of the Hot Melting
and Filling Instrument to avoid scalding. Power off, cool it down slightly,
and push the pushing ram down.
10 After-sales service
Since the date of sales, if the device cannot work normally for quality
problem, our company will be responsible for the repair of device during
the warranty period. Please refer to the Warranty Card for warranty
period and warranty scope.