17
range: 0.4-5.0Ncm)
3.7 User-defined system
PROGRAM Mode: 8 sets of User-defined continuous rotary system
speed and torque parameters can be set, and the user defined file system
number (File system number: 1-8) can be switched by the button.
Safety Glide Path Mode: 3 sets of User-defined Safety Glide Path
system speed, torque, forward angle and reverse angle parameters can
be set. In the Safety Glide Path mode, press the SET button to switch
between the forward and reverse angles. Press the ANGLE “+”button to
increase the angle, press the ANGLE “-” button to decrease the angle.
The adjusting range of angle is 20°-400°, with 10 ° interval for each
adjustment.
The adjusting range of speed is 100-500rpm, the adjusting range of
torque is 2.0-5.0Ncm. (File System No.: 1-3)
3.8 Calibration
This function is to decrease fluctuation in the rotation speed of the
motor handpiece and the difference in torque by the contra-angle.
Calibration is recommended when using a new/other contra-angle
or after an extended period of operation, as the running properties can
change with usage, cleaning and sterilization.
a. Install the contra-angle to the motor handpiece.
b. Touch the “En-Ap” button to select the Motor alone mode.
c. Touch the “SET” button for more than 1 seconds to enter setting
interface.
d. Touch the “SYSTEM” button to select “Contra-angle Calibration”
, then touch the “En-Ap” button to enter the calibration.
e. Power on the motor handpiece to start calibration.
f. The screen display “Calibration Successed”, then the display return
to its original state.
3.9 Battery charging
3.9.1 Base charging
The base has a built-in energy storage lithium battery.
When the battery power sign
display on the base screen,
please do not continue to use, and immediately connect the power
adapter plug to the power socket of the base. When charging, the screen
display panel power icon will scroll display, when the battery power sign
no longer scroll display, indicating that the battery was fully charged.
