Guilin Woodpecker Medical Instrument 28-780, Instruction Manual

Page: 4 / 25

2
1. “ON/OFF” button 2. Heating button
3. Work Tip Protector 4. Work Tip
5. Connecting hole for power adapter 6. Temperature Level
7. Battery level 8. Charging base
9. Battery cartridge 10. Charging indicator
11. Power adapter plug 12. Power adapter unit
1
)
“ON/OFF” button:
Under shutdown state, shortly press “ON/OFF” button to start the
device.
Under shutdown state, long press “ON/OFF” button to start the device
and change the direction of screen display, that is to say, the direction of
display can be change to adapt to the operation in left hand or right hand.
Under ON state, long press “ON/OFF” button to shut down the device.
(Time for long press is about 1s.)
Note: If there is no operation for 10 minutes, the Heating and Packing
Instrument will automatically shut down.
Under ON state, shortly press “ON/OFF” button to change the preset
temperature of Work Tip. The preset temperature will change to the next
with the sequence 150℃→180℃→200℃→230℃ after each press. And
then go back to 150℃ after short press at temperature of 230℃.
150 180 200 230
Figure 1 Preset temperature
2) Heating button:
Under the ON state, connect the Work Tip, and press Heating button to
start heating. Release the Heating button to stop heating, followed by the
fall of Work Tip temperature.
Note: If press and hold the Heating button for more than 10 seconds,
the device will stop heating. If need to continue heating, please release
the Heating button and press again.
3) Volume set
After power-on ,press “ON/OFF” button and “Heating” button
simultaneously to enter the voice volume setting mode, then short press
the “ON/OFF” button to select suitable voice volume, the last, short press
the “Heating” button to exit the voice volume setting mode as shown in
Figure2.