Guilin Woodpecker Medical Instrument 28-780, Instruction Manual

Page: 10 / 25

8
Figure 6 Work Tip Figure 7 Installation of Work Tip
open
Figure 8 Installation of
Work Tip Protector Figure 9 Error code
4.3 Installation and replacement of battery
When replacing the battery, as shown in Figure 10, first rotate the
battery barrel counterclockwise to remove the battery tube, then take the
old battery out of the battery tube, replace it with a new one, and finally
tighten the battery tube clockwise according to the corresponding thread.
Warning: When removing the battery, the screw under the
battery barrel (pointed by the arrow in Figure 10) does not need to be
unscrewed,just push the connector slightly inward to remove the battery.
Improper replacement of lithium batteries may result in unacceptable
risks,so replacement of lithium batteries requires trained personnel.
Figure 10 Replacement of battery
5 Operation method
1. According to the situation of patient, select suitable Work Tip and
install it. When installing the Work Tip, chose a suitable angle to install
the Work Tip.
Danger:
Don’t turn on the device when installing the Work Tip, to prevent
scalding the user by mistakenly pressing the heating button.
2. After pressing the “ON/OFF” button, the display screen of Heating
and Packing Instrument lights up and display the preheating temperature
and power status.