GUIDO RAYOS X NESTORET 5050, Manual, Page: 27 / 60

GUIDO RAYOS X, S.A.
NESTORET 5050
27
MAN-011
Feb. 01
Ed. 2 / Rev. 1
III.5 BODY
It is double walled. The outer wall is made of High Impact ABS, the inner wall is made
of aluminium with epoxy painting.
When all removable components of the incubator have been taken out, the body may be
cleaned with soap and water and may be desinfected using a commercially available
cold sterilizing solution. Be sure to use a solution that does not affect to the painting.
CAUTION: D
O NOT USE ANY CLEANING AGENT CONTAINING ABRASIVE
MATERIALS
. H
OT CAUSTICS
,
HIGHLY CHLORINATED SOLVENT
,
OR ANY AGENT
CONTAINING IODINE FULL STRENGTH SHOULD BE AVOIDED AS DISFIGURATION
OF THE EPOXY COATED ENAMEL COULD RESULT
.
DO NOT
GAS OR STEAM STERILIZE THE BODY
.G
AS AND STEAM
STERILIZATION TECHNIQUE COULD CAUSE BLISTERING OF THE EPOXY FINISH
AND OF THE
H
IGH
R
ESISTANT
ABS
OUTER WALL
.
III.6. BATTERY FROM POWER FAILURE ALARM
CAUTION : C
HECK PERIODICALLY THE BATTERY FROM THE POWER FAILURE
ALARM
.
To perform it, just unplug the cord from the mains meanwhile the Incubator is under
operation (the alarm will activate the corresponding Power alarm LED and the buzzer).
IMPORTANT: T
HE
NESTORET 5050 I
NCUBATOR INCLUDES THE MOST
ADVANCED ELECTRONIC DESIGN
,
INSURING GREATER RELIABILITY IN ITS
OPERATION
. A
NY TECHNICAL SERVICE PERFORMED IN ITS MAINTENANCE
REQUIRES PROPERLY TRAINED
,
QUALIFIED PERSONNEL
.
A).- MAIN MODULE
For a better explanation and understanding, the Main Module has been
clasified in the following blocks:
•
Power Supply
•
Microcontroller
•
A/D Converter and Multiplexer
•
Sensors