RadaScan
Operator - 5
Radascan User Console provides an intuitive environment that allows you to
quickly assess and control the functions of the system. This section provides
information about the options and procedures within the program.
Start up
To enter RadaScan User Console
1 Ensure that the RadaScan sensor is powered on and running correctly.
2 Locate the RadaScan User Console icon and double click it.
(or run the RadaScan User Console application from Start > Programs >
RadaScan > RadaScan User Console).
3 The Console display screen will appear. After a brief initialisation period
indicated by a connecting dialog, the sensor will begin operation and its
scanning results displayed on screen.
Suspend, exit or reset communications
RadaScan User Console offers you two options for shutting down or
suspending or resetting the sensor communication link. These options are
accessed via the RadaScan button in the lower left-hand corner:
•
Suspend
- Places the sensor into a 'sleep mode' whereby the motor ceases
spinning. However, upon command from the Console application, the unit will
return to full operation. This mode is suitable for use when travelling between
locations.
•
Suspend & Exit
- Places the sensor into the same 'sleep mode' as the
suspend command (discussed above) and also closes the RadaScan Console
program.
To suspend or exit
1 Click the 'RadaScan' button in the lower left corner of the screen (this
button is not available while navigating). A dialog box will be displayed:
2 Click the down-
arrow to reveal the
three options.
Select the required
option and click
the OK button.
Using the System
RadaScan
Console
Radascan Operators Manual 20/11/06 1:46 pm Page 5
