GUDEL NGHP Series Service Manual Download Page 37

Page: 37 / 146

5.4

Slings

Slings, chains, ropes or belts must be suitable for the load of weight of the
crate. Fasten the slings to stable parts. Secure the slings against slipping. Make
sure that no attachments are damaged by the slings.

5.4.1

Attaching the slings: Planetary gearbox

WARNING

Suspended loads

Improper handling of suspended loads can lead to severe injuries or death!

• Use appropriate lifting units

• Wear appropriate protective clothing

• Always keep sufficient distance from suspended loads

• Never enter the area below a suspended load

D002990

Fig. 5-4

Attaching the slings: Planetary gearbox

Crane hook

Lifting belt

Gearbox

Transport

SERVICE MANUAL Planetary gear Güdel NRH, NRHP,
NGHP

18014399245011339_v2.0_

EN-US

Summary of Contents for NGHP Series



















































































































































Search results

Summary of Contents for NGHP Series

Reviews:

Related manuals for NGHP Series

Brands by name

Popular brands

GUDEL NGHP Series, Service Manual

Search results

Summary of Contents for NGHP Series

Reviews:

Related manuals for NGHP Series

Brands by name

Popular brands