Gude Expert Power Control 8042 Series, Manual

Page: 53 / 96

53
Expert Power Control 8042 © 2020 GUDE Systems GmbH
Configuration
In addition to port 1, port 5 is activated here and deactivated again after 90 minutes.
A popup at the mouse pointer shows the port number of the corresponding field.
Console Commands
Instead of switching a port, you can run one or more console commands. These com-
mands are entered in the "Action CLI" tab. The "Action Cli" tab can only be selected if
the option "Perform CLI Cmd" is activated under "Options".
Example Switching a Port on a Date
If you want to switch on a timer on a certain date at a time and switch it off at a later
time, you cannot do it directly with a simple timer. Therefore it can be useful to first cre-
ate the timer as a simple timer and then adjust it in the extended dialog.