Gude Expert Power Control 8042 Series, Manual

Page: 25 / 96

25
Expert Power Control 8042 © 2020 GUDE Systems GmbH
Operating
tivated. This is a security setting in delivery to avoid accidentally locking
a SIM card with the wrong code.
·
Log in on the web interface.
· Switch to Configuration / GSM / SIM.
· Here the button "Enable GSM" is set to "No", that is the GSM module is
turned off. Set the button to "yes", then press the button "Apply" to trans-
mit the data to the EPC NET GSM.
·
Wait some minutes, until the device has logged into the GSM. You can
see the status change from the Signal Tower indicator LED on the dis-
play or in the web interface.
GSM Status LED's
The GSM status LED's displays different states of the GSM module.
Signal Tower indicator off
GSM module is deactivated.
Signal Tower indicator on
GSM module activated.
Signal Strength Indicator
·
0 bars - no signal
· 2 bars - approx. 30%
· 4 bars - approx. 70%
·
6 bars - approx. 100%
2.4.1
SMS
2.4.1.1 SMS Commands
Description of the SMS format to send commands to the device:
Format
%[cmd-name] [param 1] [...] [param N] {param 1} {...} {param N}
[param x] = mandatory parameter
{param x} = optional paramater
If activated, a port code or master code will be required. Entering these codes is initi-
ated by
p (for Port code) or m (for Master code).
2.4.1.1.1 Port: Query Port State
Format
%port state [portnumber] {Portcode/Mastercode}
Command:
Request of status of Output Port 1, Portcode 1111
%port state 1 p1111
Answer:
Hostname: ENC-2191
Output Port state: Port 1 is Off