Gude Expert Power Control 8042 Series, Manual, Page: 17 / 96

17
Expert Power Control 8042 © 2020 GUDE Systems GmbH
Operating
The web page provides an overview of the switching state, energy measurement val-
ues, as well as the external sensors, provided that they are connected. When a single
port is clicked at the
Expert Power Control 8042 , a panel with buttons to control a
single port appear:
The Port icon is green when the relay is closed, or red in the open state. An additional
small clock icon indicates that a timer is active. Timer can be activated by delay, reset
or batch mode.
An activated Watchdog is represented by an eye icon. An "X" means, that the address
that should be observed, could not be resolved. Two circular arrows show a booting
status.
The ports can be switched manually with the "On" and "Off" buttons. If the port is
turned on, it can be turned off by pressing the "Reset" button, until after a delay it turns
itself on again. The delay time is determined by the parameter Reset Duration, which is
described in the chapter "Configuration - Power Ports
". The "Close" button dis-
solves the panel again.
36