1.
Pay attention to the conditions of the area, which you’re working in.
After the engine is started, power machine will produce
poisonous flue gas. The gas may be invisible and odourless. Hence never work with the machine closed or poorly ventilated areas.
Provide for good lighting when cutting. Provide for stability when cutting in wet, snow or icy weather conditions on slopes or rough
ground.
2.
Do not let any unauthorised persons approach the machine.
The visitors and viewers, primarily the children, the ill and infirm
persons should not have any access to the working area. Prevent other persons from any contact with the machine.
3.
Always use a correct tool for the job to be done.
E.g. avoid using small tools and accessories for work that should be actually
done with a heavy tool. Use the tools only for the purposes they were designed for.
4.
Pay attention to adequate clothing.
The clothing should fit the purpose and should not put any limits to you when working
5.
Use personal protection equipment.
Wear safety shoes with steel toes and antiskid or rough sole.
6.
Wear goggles.
Object may be thrown against you.
7.
Wear ear protectors.
Wear personal protective equipment to protect your ears, such as ear protectors
8.
Hand protection.
Wear hard gloves – gloves of chrome tanned side leather give a good protection
9.
Be attentive any time. Mind what you are doing.
Use common sense. Do not use the tiller when tired. Never work with the
crusher when influence by alcohol, drugs or medicaments affecting the concentration capability..
10.
Refuelling.
Always switch the engine off before refuelling. Open the tank closure carefully for overpressure run out slowly and the
fuel ejaculation be prevented. When working with the tiller, the unit body temperature increases. Let the unit cool down before
refuelling. Otherwise, the fuel could ignite and persons get burnt. Beware of overfilling the tank. If there is a spill, remove it and
clean the unit. After finishing the refuelling, make sure the screwed closure is tight to avoid loosening in result of vibrations.
.
11.
Period of Use and Breaks .
Any prolonged use of an engine unit and its vibrations may result in impaired blood circulation of
hands. However, the time of using may be made longer by wearing suitable gloves or making regular breaks. Mind that personal
inclinations to poor blood circulation, cold outside temperatures or the power exerted on holding the unit will shorten the period of
use. .
12.
Watch out for any damaged parts.
Inspect the machine before use. Are any parts damaged? Ask yourself seriously when
detecting slight damage whether the machine will work perfectly and safely despite that. Watch out for proper aligning and
adjustment of any moving parts. Do the parts fit one in another properly? Are the part damaged? Is everything installed as
appropriate? Are any other prerequisites of proper working in place? Damaged protective devices etc. must be repaired or
replaced by authorised entities unless the operation manual expressly says otherwise. Any defective switches must be replaced at
an authorised servicing centre. Do not use the machine if it cannot be put on and off with the switch. When repairs are necessary,
kindly turn to your local servicing centre.
13. Always switch the engine odd before set-up or maintenance .
14.
Use approved components only.
Use genuine spare parts for maintenance and repairs; these may be got in authorised
servicing centres.
Warning!
Use of parts other than those recommended for use may cause a personal risk and damage of property .
The machine should be used for the assigned purpose only. Any other use shall be considered incompetent. Only the user, not in any
case the manufacturer, shall be held liable for personal injuries and damage of property resulting from incompetent use of the machine.
The manufacturer shall not be held liable for damages resulting from alterations made on the machine or from unskilled handling the
machine.
Device-specific safety instructions
• provide combustion during operation and refueling at a particular risk; Always the warnings in the manual of the engine and the
safety instructions below and read note. Otherwise, there can be serious or even fatal injuries.
• The machine is NOT in indoor or enclosed areas, such as a deep ditch, running, unless there is adequate ventilation by exhaust
fans or hoses. Engine exhaust contains poisonous carbon monoxide; einerkohlenmonoxydhaltigen stay in the environment may
lead to unconsciousness and death.
• During operation of the machine does not smoke.
• When refueling the machine does not smoke.
• DO NOT refuel when the engine is running or still hot.
• The machine is NOT in the vicinity of an open flame refuel.
• When refueling the machine NO fuel spillage.
• The machine is NOT in the vicinity of open flames operate.
• The fuel tank ALWAYS in a well ventilated area thoroughly.
• After refueling ALWAYS the tank cap.
• ALWAYS fuel line and tank to crack and leak check, and the device under such damages are not in operation.
• Poorly maintained machines may be a danger! Only regularly and properly maintained and repaired when necessary skill
machines over long periods of time safely and properly operated.
• The machine NOT in running condition clean, maintain or adjust. Rotating parts can cause serious injuries.
• A flooded Petrol NOT boost, as long as the spark plug is removed. The pent-cylinder fuel injected from the spark plug hole out.
• NO Zündfunkentest to make gasoline engines when the engine is flooded or gasoline is to smell. A stray spark could ignite the
vapors.
31
