GÜDE Expert Net Control 2304, Manual

Page: 60 / 93

60
Expert Net Control 2304 © 2022 GUDE Systems GmbH
Specifications
4.6.1
Device MIB 2304
Below is a table of all device-specific OID 's which can be accessed via SNMP. In the
numerical representation of the OID the prefix " 1.3.6.1.4.1.28507 " (Gude Enterprise
OID) was omitted at each entry in the table to preserve space. The example for a com-
plete OID would be "1.3.6.1.4.1.28507.101.1.1.1.1". A distinction is made in SNMP OID
's in between tables and scalars. OID scalar have the extension ".0" and only specify a
value. In SNMP tables the "x" is replaced by an index (1 or greater) to address a value
from the table.
Name OID Type Acc.
Description
enc2304TrapCtrl .101.1.1.1.1.0 Integer32 RW
0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3
enc2304TrapIPIndex .101.1.1.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each receiver slot.
enc2304TrapAddr .101.1.1.1.2.1.2.x OCTETS RW
DNS name or IP address specifying one Trap receiver slot. A port can
optionally be specified: 'name:port' An empty string disables this slot.
enc2304portNumber .101.1.3.1.1.0 Integer32 RO
The number of Relay Ports
enc2304PortIndex .101.1.3.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each Relay Port.
enc2304PortName .101.1.3.1.2.1.2.x OCTETS RW
A textual string containing name of a Relay Port.
enc2304PortState .101.1.3.1.2.1.3.x INTEGER RW
current state a Relay Port
enc2304PortSw itchCount .101.1.3.1.2.1.4.x Integer32 RO
The total number of sw itch actions ocurred on a Relay Port. Does not
count sw itch commands w hich w ill not sw itch the ralay state, so just
real relay sw itches are displayed here.
enc2304PortStartupMode .101.1.3.1.2.1.5.x INTEGER RW
set Mode of startup sequence (off, on , remember last state)
enc2304PortStartupDelay .101.1.3.1.2.1.6.x Integer32 RW
Delay in sec for startup action
enc2304PortRepow erTime .101.1.3.1.2.1.7.x Integer32 RW
Delay in sec for repow er port after sw itching off
epc2304PortResetDuration .101.1.3.1.2.1.8.x Integer32 RW
Delay in sec for turning Port on again after Reset action
enc2304Buzzer .101.1.3.10.0 Integer32 RW
turn Buzzer on and off
enc2304ActiveInputs .101.1.5.6.1.0 Unsigned32 RO
Number of suppported Input Channels.
enc2304InputIndex .101.1.5.6.2.1.1.x Integer32 RO
None
enc2304Input .101.1.5.6.2.1.2.x INTEGER RO
Input state of device
enc2304InputName .101.1.5.6.2.1.32.x OCTETS RW
A textual string containing name of the Input
epc2304CPUSensorVsystem .101.1.5.14.1.0 Gauge32 RO
System Voltage on CPU Board
epc2304CPUSensorVaux .101.1.5.14.2.0 Gauge32 RO
Auxiliary Voltage on CPU Board
epc2304CPUSensorVmain .101.1.5.14.3.0 Gauge32 RO
Main Voltage on CPU Board
epc2304CPUSensorTcpu .101.1.5.14.4.0 Integer32 RO
Temperature on CPU Board
epc2304NTPTimeValid .101.1.5.15.1.0 INTEGER RO
Show if valid Time is received