GÜDE 40532 Translation Of Original Operating Instructions Download Page 9

14. Tripping 

pin 

 

Guarantee 

 
A warranty period of 12 months applies to commercial use 
and 24 months apply to private use and commences on the 
day of purchase of the device.  
 
Warranty applies exclusively to failures due to defective 
material or workmanship. An original sale slip with indication 
of date of sale must be presented in case of claiming for the 
warranty rights.  
 
Warranty does not cover unprofessional use such as device 
overload, violent use, damage caused by third party or 
foreign materials, failure to comply with operations and 
assembly manual, and normal wear and tear. 
 

 Important basic safety instructions 

 
Before you start working with the appliance please read 
carefully the following safety regulations and Operating 
Instructions. If any other person is to handle the appliance 
provide him/her with the Operating Instructions. Keep the 
Operating Instructions for future reference! 

 
Package: 

The appliance has been put in a package to 

prevent any damage during transport. Packages are raw 
materials so they can be reused or recycled. 
 
Please read carefully the Operating Instructions and follow 
them. Use these Operating Instructions to get acquainted 
with the appliance, its corresponding use and safety 
instructions. Keep the Instructions for future reference. 

 

 

Perform a visual control of the product before you put 
it into operation each time. Do not use this product, if 
safety devices are damaged or worn off. Never 
deactivate safety devices. 

 

Use this product only according to the intended use 
specified in this user manual. 

 

Be always careful when working. Watch your activity. 
Proceed carefully. Do not use the metal saw if you are 
not concentrated. 

 

You are responsible for the safety in the work area. 

 

Never leave the product unsupervised. 

 

Never use the product in wet or moist conditions or if 
it rains. 

 

Do not use electric tools near flammable liquids or 
gases. 

 

Do not switch on the product, if it is turned upside 
down or if it is not in the operating position. 

 

Keep the product away from other people, especially 
from children and also pets. 

 

After you finish working with the appliance, pull the 
plug out of socket and check if the appliance is not 
damaged 

 

If you do not use the product, keep it at a dry place, 
which is not accessible for children. 

 

Repairs may be only carried out by a professional 
electrician. 

 

Before putting the machine into operation and after 
impact of any kind, check it for sign of wear or 
damage and arrange repairs if necessary. 

 

Never use spare parts and accessories, which are not 
specified or recommended by the manufacturer. 

 

Use the machine only under daylight or with sufficient 
artificial lighting.

 

 Wear 

protective 

clothing suitable for the given 

environment the whole time you work and take 
suitable preventive measures to prevent accidents.

 

 

Do not use the cable for any other purpose than 
specified. Do not wear the cable by its cable and do 
not use the cable for pulling the plug out of socket. 
Protect the cable against excessive temperatures, oil 
and sharp edges.

 

 

Be very careful of your appliance. Keep it clean so 
that working with it is fine and safe. Regularly check 
the plug and cable and have them repaired by an 

authorised specialist if damaged. Regularly check the 
extension cables and have any damaged cable 
replaced by a specialist.

 

 

Extension cables to be used outdoors only. For 
outdoor work, use extension cables adequately 
marked and approved for that purpose (within 20 m 

1.5 mm², 20-50 m 

 2.5 mm²)

 

 

Unplug the appliance 

-  before every cleaning 
after each use 

 

Persons unable to operate the appliance due to 
their physical, sensory or mental abilities or their 
inexperience or lack of knowledge must not operate 
it. 

 

If the appliance show any sign of visible damage 
the appliance must not be put into operation. 

 

If the feeder cable of the appliance is damaged it 
needs to be replaced by the producer or an 
electrician. 

 

Repairs of the appliance can only be executed by 
an electrician. There might be significant risks as a 
result of unauthorised repairs.

 

 

The same regulations apply for accessories

 
Güde GmbH & Co. KG does not answer for damages 
caused by: 

 

Appliance damage by mechanical influences and 
overloading. 

 

Any changes to the appliance. 

 

Use for any other purpose than that described in 
the Operating Instructions. 

 

Unconditionally follow all safety instructions to 
prevent accidents and damage. 

 

 Important product-specific safety instructions 

 

Caution:  Before using the machine on a regular basis, 
read the safety regulations below carefully and abide by 
the same. It is your way to prevent injuries and fire.  
 

 

Never touch the disk when cutting is in progress. 

 

Avoid any bodily contact with grounded parts, such as 
tubes, radiators, cookers and refrigerators 

 

Always wear goggles. Regular glasses cannot stand 
for goggles. Wear a respirator when working in a dusty 
area. Wear ear protectors (plugs) when working for 
long periods of time.  

 

Do not overload the machine. 

 

Do not use a low output machine/tool for demanding 
jobs. 

 

Do not wear loose-fitting garments and jewels 

 

Protect the power cable against excessive 
temperatures and sharp edges. Have it replaced only 
at a specialist’s 

 

Fix the saw to the work table as appropriate 

 

Replace any blunt disks on time. 

 

The machine should be supplied with current of 
maximum value 30 mA via stray current protection (FI)  

 

The appliance meets EN 61000-3-11 requirements and 
is subject to special connection conditions. That means 
that use on optionally selected connection points is 
inadmissible. 

 

The appliance can lead to occasional voltage 
fluctuations under unfavourable power conditions. 

 

The appliance is only designated to be used for 
connection points not exceeding the maximum allowed 
impedance of Z

max 

= 0,233 

 

As a user, you must make sure your connection point 
on which you want to use the appliance meets the 
above-mentioned requirements – after agreement with 
your electricity supplier if necessary. 

 
Behavior in case of emergency 

 
Perform necessary first aid measures according to the injury 
and call for medical attendance as soon as possible. 
Prevent the injured against any further injuries and calm him 
down. 

9

Summary of Contents for 40532





















































Reviews: