36
ekey finger scanner
Operating instructions
B-55600-13-4-6
10.2018 | 20525E | Designed in Germany
EN
5.2 Test mode
Connect the mains voltage and perform the test within the next
10 minutes. Once the 10 minutes have elapsed, this test can only be carried
out following a power-on reset of the fingerprint scanner.
A test can only be performed if a master finger has
not yet been stored or if a mobile device has not yet
been paired.
You can place your finger on the sensor for a
maximum of 5 s. If you leave your finger on the
sensor for longer, the relay will not switch.
NOTE
If you take the
finger off, the relay
switches.
Put a finger on the
sensor for 3 - 5 s.
Fingerprint scanner
is paired with
SECURE
connect
200.
No fingerprint stored.
