37
ACCESSORIES
®
AUT
OMA
TIC
GAT
E LO
CK
®
ELECTR
ONIC SEC
URITY
LOCK
Solar Panel (FM123), (FM122)
The
Solar Panel
is a 0 watt solar powered battery charger for use with the
all GTO/PRO DC
gate
operator systems. Particularly suited for remote installations, each
Solar Panel
comes with tubular
steel support, mounting clips, wire connectors, and 8 ft. of low voltage wire (see Low Voltage Wire
for additional wire). The
GTO/PRO®
control board has clearly labeled terminal connections for easy
installation of the
Solar Panel
. Installation in some regions of the world will require multiple solar
panels for adequate charging power.
Solar Panel (FM122)
is a 5 watt solar powered battery
charger with all the same features as (FM123).
Push Button Control (RB101)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 6
gauge multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM345)
The
Pin Lock
substitutes for the clevis pin at the front end of the
GTO/PRO®
2000XL gate operator.
Helps prevent theft of the operator from the gate, while allowing quick release of the operator.
Key Chain Two Button Transmitter (RB742)
The Key Chain Mini Transmitter is a miniature version of the
GTO/PRO®
entry transmitter and has
the same adjustable code settings. 2 Volt battery included.
Single Button Transmitter (RB741)
The
GTO/PRO®
entry transmitter, with adjustable code settings, is standard equipment with all
GTO/PRO®
systems. 2 Volt battery included.
Digital Keypad (F310)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be
programmed to use up to 25 different personal identification number (PIN) codes. Each code is face
programmable with additional security features built in. Wired installations require 6 gauge, low
voltage, multi-stranded, dual conductor, direct burial wire (sold separately). Requires 3 AA batteries
(not included).
GTO/PRO 50' Exit Wand (FM139), 100' Exit Wand (FM140), 150' Exit Wand (FM141)
The
GTO/PRO®
Exit Wand is designed for residential and agricultural applications and is
compatible with all
GTO/PRO®
automatic gate operator models. The wand is an electromagnetic
sensor, which offers 'hands free' operation of the
GTO/PRO®
Gate Operators with a 2 ft. radius of
detection of vehicles in motion.
Automatic Gate Lock Pull-to-Open (FM144)
A
MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically
as gates open and close. Used with
GTO/PRO®
DC swing gate operating systems for maximum
stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long.
Ideal for animal enclosures or high wind areas.
Wireless Entry Intercom / Keypad (F3100MBC)
Allows owner to screen guest at the gate before allowing access to the property. Keypad also allows
owner to give up to 25 programmable entry codes to family, friends or approved delivery personnel.
Codes can be permanent of temporary. Can be wireless up to 500 feet or hard wired up to 000 feet.
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
POW
ER
Key
pad
Bat
t Lo
w
Gran
t
Perm
issio
n
An
sw
er
DV 9V
ACC
ES
S CONTR
OL
SYS
TE
MS
1-
80
0-5
43
-4
28
3
