8
GPX-SL25 Instruction Manual
rev 03.21.13
Step 5
Align template on form as show in illustration
above. Locate and secure wiring conduit.
Remove template and pour concrete and let set
.
Step 6
After concrete has hardened, align template
on concrete pad as shown above. Drill holes in
concrete for anchor bolts. Remove Template.
Step 7
Align operator unit on anchor bolts.
Check level.
Assemble the three mounting brackets
for the operator cover as shown at right.
Assemble the washers and nuts.
Tighten with wrench.
USING THE MOUNTING TEMPLATE
Locate wiring conduit using
the mounting template before
pouring concrete.
Align this edge of
mounting template
with this edge of
concrete pad
This line on mounting
templage aligns
with string
18” Minimum
below ground
Align these lines with
edges of concrete pad
Wood form for
concrete pad
Concrete pad
Concrete pad
String
String
String
String
Align this edge of
mounting template
with inside edge of
wood form
Use flat washers
as needed to
level operator
Assemble mounting
brackets for operator
cover before installing
to concrete pad
Mounting
Template
Mounting
Template
Locate wiring conduit using
the mounting template before
pouring concrete.
Align this edge of
mounting template
with this edge of
concrete pad
This line on mounting
templage aligns
with string
18” Minimum
below ground
Align these lines with
edges of concrete pad
Wood form for
concrete pad
Concrete pad
Concrete pad
String
String
String
String
Align this edge of
mounting template
with inside edge of
wood form
Use flat washers
as needed to
level operator
Assemble mounting
brackets for operator
cover before installing
to concrete pad
Mounting
Template
Mounting
Template
Locate wiring conduit using
the mounting template before
pouring concrete.
Align this edge of
mounting template
with this edge of
concrete pad
This line on mounting
templage aligns
with string
18” Minimum
below ground
Align these lines with
edges of concrete pad
Wood form for
concrete pad
Concrete pad
Concrete pad
String
String
String
String
Align this edge of
mounting template
with inside edge of
wood form
Use flat washers
as needed to
level operator
Assemble mounting
brackets for operator
cover before installing
to concrete pad
Mounting
Template
Mounting
Template
Existing
Pad
