Installation Checklist
the installation of this operator conforms to class __________.
The installer verifies that (each item must be checked):
____
Required safety edges or photo beams were installed.
____
Roller guards were installed over gate rollers.
____ Fence was screened so that no one can reach through the gate to operate controls.
____ Customer was informed that this gate is for vehicular use
oNlY.
Pedestrians
MaY Not
use this gate.
____ A separate gate or entrance was installed for pedestrian use.
____ All warning signs and labels were installed as specified in the
iMportaNt saFetY iNstructioNs.
____ Safety instructions were reviewed with the customer.
____ The
iMportaNt saFetY iNstructioNs
manual was given to the customer.
____ Customer was instructed about proper use of the chain release pins.
____
Customer was asked to fill out customer support card and mail it to GTO, Inc.
____ Customer was asked to
retain all receipts
(receipts provide proof of warranty).
____ Customer was asked to retain
iMportaNt saFetY iNstructioNs
, etc. for future reference.
____ The completed installation was photographed from both the front and back of the gate. Photo was dated.
Customer’s Signature
Date
Installer’s Signature
Date
© 2007 GTO, Inc.
w w w . g t o p r o . c o m
