12
rev 06.13.12
Mount Battery Box and Control Box
Step 1
Remove the Control box from the Battery Box by
removing the three screws as shown.
Step 2
Mount the Battery Box using the screws
(provided) or another secure mounting method.
The battery/control box must be mounted at
least 3 feet above the ground to protect it from
rain splash, snow, etc., and at least 3 feet
from an AC power source to prevent electrical
interference.
Step 3
Slide the battery into position with the terminals at
the TOP (see
Illustration B
).
Closed Position Stop Plate mounted
on the SECOND GATE
Closed Position Stop Plate
Low Profile
Ground Stop
in Near the Center of Driveway
FACING VIEW
SIDE VIEW
Mount Vertically
Closed Position
Stop Plate
Low Profile Ground Stop
Closed Position
Stop Plate
Step 4
Using appropriate hardware for your type of gate, attach the vertical
closed position stop plate to the SECOND gate frame at the point
where it will come in contact with the low profile ground stop. Do not
tighten it completely at this time. You must slide the closed position
stop plate toward the low profile ground stop until they touch. Once
you have moved the stop plate to the correct position, tighten its
hardware completely.
Step 5
Return the gates to their open positions and
reattach the gate openers to the gates.
1.
KEEP CLE
AR! G
ate may mo
ve at a
ny tim
e.
2.
Do not allow c
hildre
n to
opera
te ga
te or
play in ga
te area.
3.
This gate i
s for vehic
les on
ly. P
edest
rian
s
must us
e a s
eparate
entra
nce.
Moving Ga
te Can
Ca
use
Injury O
r Dea
th
WARNING
!
Control Box
Piece of Wood
for Mounting
Screw Placement Guides
Battery Box
Control Box
Illustration B
